- Porcelain light socket
- Bakelite lamp socket
- Brass sockets
- Pendant light socket
- Plastic lamp holder
- Fluorescent light socket
- Light bulb adapter
- light socket plug adapter
- light socket extender
- lamp cap
Gx24 to E26 & E27 adapter 4 pin cfl to led conversion plug
Model No: 4 pin cfl to led conversion
Type: Gx24 to E26 adapter & Gx24 to E27 adapter
Body Material: Flame retardant PBT
Contact Material: Copper.
Certification: CE and Rohs listed
HS code: 9405920000.
4 pin cfl to led conversion is made of Flame retardant PBT + Copper, LED common lamp holder fits both GX23D and GX23D-2. The GX23D 2 pin has two notches on the middle post. G24 2 pin male light base to E27 female medium lamp holder adapter. Use a E26 bulb in an G24 2 pin light bulb socket.
4 pin cfl to led conversion, this Gx24 to E26 adapter & Gx24 to E27 adapter are LED. common light socket so it fits all GX24Q lamp holder. the main part of the GX24Q is 15 mm. Up to 250 V, 2 amps for a total for 500 watts of rated power. GX24Q-1, GX24Q-2, Gx24Q-3, GX24Q-4. The starter and/or ballast will need to be bypassed if using a James Lighting, incandescent or a Ballasted CFL in the fixture. Gx24 base has a shorter ledge than G24 lamp holder the GX24Q means 4 pins. Traditional G24 and GX24q fluorescent plug and HPS converters save money, time and labor versus replacing the CFL fixture.
FAQ 1: Can I use a GX24 socket plug into the existing G24 fitting ?
FAQ 2: Are they interchange base ?
Answer is NO.
they are not interchangeable Gx24 to E26 & E27 adapter. The LED common 4 pin cfl to led conversion fits all GX24Q socket regardless of the notches/keying tabs, because the lamp holder does not have any keying tabs so it fits in all 4 pin cfl to led conversion. Made of flame retardant PBT and copper materials. This converter/adapter works with Edison Medium Gx24 to E26 & E27 adapter based male bulbs rated up to 500 watts. The GX24Q 4 pin is called the USA lamp holder.
Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. Please measure middle post BEFORE buying this converter it should be 15 mm or .59 inches or approximately 9/16 inch. Please use a certified electrician to disable any existing external ballast. Fits both a Gx24 to E26 & E27 adapter.
If you’re tired of flickering porch lights, retrofit the CFL plugins from your porch sconces or office fixtures with plugin LED retrofit lamps. Plugin LED lamps are extremely long lasting, and have an exceptional energy efficiency rating. They handle temperature changes far better than traditional fluorescents as well. These 4-pin LED PL lamps range in wattages from 13 watts to 26 watts and replace a standard Gx24 to E26 & E27 adapter 4 pin cfl to led conversion. LED lamps are typically self-driven, meaning the ballast should be removed.